PEMANFAATAN LIMBAH STYROFOAM SEBAGAI CAMPURAN PEMBUATAN BATA RINGAN

Nurnilam Oemiati, Jonizar Jonizar, Aang Tri Meyrian

Abstract


Lightweight bricks are bricks that have a specific gravity lighter than bricks in general. Lightweight bricks can also be made using additives, such as alumina powder which produces gas when the concrete is still plastic or by using aggregates of low density, such as pumice, volcanic ash, and diatomite rock, which are the most commonly used natural aggregates. Styrofoam is inseparable from efforts in utilizing waste to be taken from around the Palembang area. Thus the addition of styrofoam waste will not have a negative impact on the environment because it can be used as lightweight bricks. (0%) 241 kg/cm2, styrofoam mix (20%) 82.3 kg/cm2, styrofoam mix (40%) 75.25 kg/cm2, styrofoam mix (60%) 26.4 kg/cm2 , styrofoam mix (80%) 9.05 kg/cm2, styrofoam mixture (100%) 0 kg/cm2.

Full Text:

PDF


DOI: https://doi.org/10.32502/jbearing.4185202172

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Published by :

Program Studi Teknik Sipil, Universitas Muhammadiyah Palembang

P-ISSN : 2085-6261

E-ISSN : 2623-1409

Email : bearing@um-palembang.ac.id 

 Creative Commons Licence

Bearing : Jurnal Penelitian dan Kajian Teknik Sipil is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.