Analysis of Opening and Closing Time of Elevator Door: The KH Mas Mansyur Building at Muhammadiyah University Palembang

Bagus Ramandika; Ramadisu Mafra

doi:10.32502/tekstureka.v0i0.7613

Analysis of Opening and Closing Time of Elevator Door: The KH Mas Mansyur Building at Muhammadiyah University Palembang

Bagus Ramandika, Ramadisu Mafra

Abstract

As an important element in a vertical transportation system, lift doors play a crucial role in the lift's overall performance. Limited time for opening and closing doors can affect the flow rate of passengers, reducing the efficiency of using the elevator. This research aims to analyze the time required by the system for the lift door opening and closing process which will be explained using quantitative descriptive methods. The research method utilizes the time motion method with video recording system technology tools during the process of opening and closing the elevator doors in the KH Mas Mansyur Building, Kampung B, Muhammadiyah University, Palembang. For six days, the research was carried out during the busiest hours. The research results are expected to provide an in-depth understanding of the variables that influence door opening and closing times, such as door speed, passenger detection, and security mechanisms. The research results show that in fact the average time for the lift door opening and closing process in the "Fuji" brand lift in the KH Mas Mansyur campus building, Muhammadiyah University in Palembang is from 08.00 am-09.00 am for six days, namely 9.4 seconds.

Keywords

lift; lift door; vertical transportation

Full Text:

BRR (Bahasa Indonesia)

References

Almanda, D. and Ramadhan, I. T. (2021) ‘Analisis Kebutuhan Motor Listrik Untuk Meningkatkan Efisiensi Waktu Tunggu Elevator’, RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer), 4(2), p. 91. doi: 10.24853/resistor.4.2.91-96.

Fahriansyah, A., Hartadi, B. and Herlina, F. (2021) ‘Perencanaan Lift Penumpang dengan Sistem Penggerak Tipe Traksi Kapasitas 600 kg untuk Keperluan Gedung Rumah Sakit Studi Kasus RS Sumber Jaya Sehat Kandangan’.

Hakim, A. R. (2023) ‘Sistim Pengunci Mekanik Sebagai Solusi Pokayoke Keamanan Pintu Lift Pengangkut Barang’, 6(1), pp. 155–158.

Hermanto (2019) ‘Perencanaan Keseimbangan Lini (Line Balancing) Untuk Meningkatkan Efisiensi Lintasan Kerja Perkaitan Elevator Pada Pt Hyundai Elevator Indonesia’, Jurnal Teknik, 8(1), pp. 1–5. doi: 10.31000/jt.v8i1.1581.

Kementerian ketenagakerjaan (2017) ‘Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 6 Tahun 2017 Tentang Keselamatan Dan Kesehatan Kerja Elevator Dan Eskalator’, Kementerian Ketenagakerjaan, 151(2), p. 99. Available at: https://jdih.kemnaker.go.id/katalog-1498.html.

Mafra, R. (2023) ‘Komparasi Dimensi Hoistway Passanger Elevator’, Jurnal Desiminasi Teknologi, 11(2), p. p.

Nurdin, R. (2022) ‘Perencanaan Elevator (LITF) Kampus Sekolah Tinggi Teknologi Industri Bontang (STTI Bontang) Lantai Enam Dengan Kapasitas Delapan Orang’, Jurnal Juara, 2(1), pp. 2798–3315.

Nurjaman, J. (2019) ‘Perancangan Elevator Pengangkut Barang Kapasitas 3 Ton’, 1(1), pp. 1–9.

Prasetiawan, H. D., Sihombing, R. F. and Siahaan, E. (2023) ‘1) 2) 3) 4)’, Jurnal Teknologi Mesin UDA, 4, pp. 162–168.

Prihantoni, Z. and Eliza, F. (2022) ‘Sistem Pengaman Lift dengan RFID Berbasis Mikrokontroler’, JTEIN: Jurnal Teknik Elektro Indonesia, 3(1), pp. 223–232. doi: 10.24036/jtein.v3i1.232.

Sitohang, D. C. and Pardede, S. P. (2022) ‘Perencanaan NUT Elevator Untuk Pabrik Kelapa Sawit Dengan Kapasitas 35 Ton Tbs/Jam Pt Perkebunan Nusantara Iv Unit Pabrik Kelapa Sawit Pasir Mandoge’, Jurnal Teknologi Mesin UDA, 3(1), pp. 117–127.

Suwanda, T. et al. (2023) ‘Pembuatan Lift Barang Untuk Rumah Dua Lantai’, INSOLOGI: Jurnal Sains dan Teknologi, 2(2), pp. 265–278. doi: 10.55123/insologi.v2i2.1629.

Tarigan, K. and Togatorop, E. (2022) ‘Perancangan Elevator Penumpang Pada Gedung Bertingkat Dengan Kapasitas 500 Kg Di Yanglim Plaza Medan’, 3(1), pp. 1–11.

Zayadi, A., P., C. H. and Masyudi, M. (2019) ‘Perencanaan Lift Hotel Bertingkat Tiga Puluh Berdasarkan SNI Nomor: 03-6573-2001’, Jurnal Ilmiah Giga, 19(2), p. 61. doi: 10.47313/jig.v19i2.566.

DOI: https://doi.org/10.32502/tekstureka.v0i0.7613